Class C Asbestos Removal

Is your property free of asbestos now? Do you need repair after the asbestos removal? If so… then you need a class 3 asbestos removal expert! JC Asbestos Removal is here to assist you in class 3 asbestos work!

Speak to JC Demolition For Details about Class 3 Asbestos Removal!

Asbestos has been widely used since the 1800s for fireproofing, soundproofing and insulation. It was in 1920 when the first asbestos cement was manufactured in Australia and was used as a building material from the mid-40s until the late 1980s. Later on, asbestos cement was phased out because asbestos products were banned.

With this, we can deduce that houses built during those periods have a high possibility of asbestos content which may be found in eaves, internal and external cladding, ceilings and fences. Asbestos is a dangerous substance because of its microscopic fibers that can cause lung diseases if inhaled.

However, you shouldn’t panic! Asbestos experts can help ensure that your property is asbestos free and can minimize the exposure of fibers to the air. In Australia, there are asbestos abatement methods which can help decrease the risks and hazards to asbestos exposure. In line with this, rebuilding and repair after asbestos removal is also a consideration.

With the help of a class 3 asbestos removal specialist, rebuilding and repair after asbestos removal will be easier.

Damaged roof, gutter and other parts of your property due to asbestos removal call for a class 3 asbestos removal work! Here at JC Asbestos Removal, we can rebuild and repair the former asbestos contained area to better specifications. We have a team of professionals who can ensure that your home or property will be free from asbestos forever.

Our class 3 asbestos removal process is also tailored to Australian standards. In that way, you will feel more confident and safer about our asbestos removal service.

Class 3 asbestos removal involves repair and maintenance operation that may disturb asbestos-containing materials (ACM) which means that a class 3 asbestos worker should be extra careful. This type of asbestos work classification does not involve asbestos removal as a primary purpose. With class 3 asbestos removal, removed ACM shouldn’t exceed one glove bag.

class 3 asbestos removal may involve the following methods:

  • Drilling
  • Sanding
  • Sawing
  • Cutting
  • Breaking the ACM thermal system insulation

The JC Asbestos Removal team are well trained and qualified for class 3 asbestos removal work. We also have a competent person who can create a Negative Exposure Assessment to ensure that asbestos removal is a success.

In addition, we also perform the class 3 asbestos removal work using the wet method in a regulated area demarcated with “Danger, Asbestos, Authorized Personnel Only, Cancer and Lung Disease Hazard” to ensure that the whole area is covered and protected from outsiders.

Here at JC Asbestos Removal, we always put all our efforts to meet the Australian standards and give emphasis to the code of practice. If the class 3 asbestos removal method involves drilling, cutting, abrading, sawing or breaking, we always make sure that the area is isolated with the use of glove bags and impermeable drop cloths.

We are for maximum safety! All of our asbestos workers are wearing the PPE for protection. The JC Asbestos Removal workers are also aware of the do’s and don’ts in the asbestos contained area. As for client safety, we will also provide you with information on how to go about asbestos exposure.

For further assistance about class 3 asbestos removal, call us!

Schedule a Callback
close slider